MARINE PRODUCTS Catalogue - page New13

NEW13
Doc: PIS - Aquavalve 3.0.doc
Page 1 of 5
PRODUCT
INFORMATION
LEADERS IN MARINE COMPOSITE FITTINGS
AQUAVALVE
The Tru-Design Aquavalve is the most versatile valve on the market today. The Aquavalve is
designed and made in New Zealand, for demanding marine sanitation applications.
The Aquavalve is typically used in marine toilet applications where protection for the environment
necessitates the need to control effluent discharge – in many countries this is governed by
regulation. The effluent can be held in a holding tank for later discharge ove
side facility.
The Tru-Design Aquavalve is moulded from a glass reinforced nylon composite. High strength,
high-modulus glass fibres impregnated into the nylon provides dramatic strength, stiffness,
toughness, and dimensional stability.
MODELS
Part #
Description
90314
Aquavalve White
90312
Aquavalve Black
New
Products
Doc: PIS - Skin Fittings 3.0.doc
Page 1 of 4
PRODUCT
INFORMATION
LEADERS IN MARINE COMPOSITE FITTINGS
SKIN FITTINGS
Designed and made in New Zealand, Tru-Design Skin Fittings are the superior composite thru-hull
solution.
The Skin Fitting body and nut are moulded from glass fibre reinforced nylon composite. High
strength, high-modulus glass fibres impregnated into the nylon provide dramatic strength, stiffness,
toughness and dimensional stability. These properties allow a significant weight reduction over
metallic fittings.
Tru-Design Skin Fittings eliminate the corrosion and electrical bonding problems associated with
metallic fittings.
Our Skin Fittings meet ISO International Standards giving added assurance of performance in the
harsh marine environment.
MODELS
Part #
Description
90425
Skin Fitting ½” BSP White
90432
Skin Fitti g ¾” BSP White
90423
Skin Fitting 1” BSP White
904 1
Skin Fitting 1¼” BSP White
90419
Skin Fitting 1½” BSP White
90429
Skin Fitting 2” BSP White
90424
Skin Fitting ½” BSP Black
90431
Skin Fitting ¾” BSP Black
90422
Skin Fitting 1” BSP Black
90420
Skin Fitting 1¼” BSP Black
90418
Skin Fitting 1½” BSP Black
90428
Skin Fitting 2” BSP Black
Doc: PIS - Skin Fittings 3.0.doc
Page 1 of 4
PRODUCT
INFORMATION
LEADERS IN MARINE COMPOSITE FITTINGS
SKIN FITTINGS
Designed and made in New Zealand, Tru-Design Skin Fittings are the superior composite thru-hull
solution.
The Skin Fitting body and nut are moulded from glass fibre reinforced nylon composite. High
strength, high-modulus glass fibres impregnated into the nylon provide dramatic strength, stiffness,
toughness and dimensional stability. These properties allow a significant weight reduction over
metallic fittings.
Tru-Design Skin Fittings eliminate the corrosion and electrical bonding problems associated with
m tallic fittings.
Our Skin Fittings meet ISO International Standards giving added assuranc
e
harsh marine environment.
MODELS
Part #
Description
90425
Skin Fitting ½” BSP White
90432
Skin Fitting ¾” BSP White
90423
Skin Fitting 1” BSP White
90421
Skin Fitting 1¼” BSP White
90419
Skin Fitting 1½” BSP White
90429
Skin Fitting 2” BSP White
90424
Skin Fitting ½” BSP Black
90431
Skin Fitting ¾” BSP Black
90422
Skin Fitting 1” BSP Black
90420
Skin Fitting 1¼” BSP Black
90418
Skin Fitting 1½” BSP Black
90428
Skin Fitting 2” BSP Black
Doc: PIS - Skin Fittings 3.0.doc
Page 1 of 4
LEADERS IN MARINE COMPOSITE FITTINGS
metallic fittings.
Tru-Design Skin Fittings eliminate the corrosion and electrical bonding problems associated with
metallic fittings.
Our Skin Fittings meet ISO International Standards giving added assurance of performance in the
harsh marine environment.
MODELS
Part #
Description
90425
Skin Fitting ½” BSP White
90432
Skin Fitting ¾” BSP White
90423
Skin Fitting 1” BSP White
90421
Skin Fitting 1¼” BSP White
90419
Skin Fitting 1½” BSP White
90429
Skin Fitting 2” BSP White
90424
Skin Fitting ½” BSP Black
90431
Skin Fitting ¾” BSP Black
90422
Skin Fitting 1” BSP Black
90420
Skin Fitting 1¼” BSP Black
90418
Skin Fitting 1½” BSP Black
90428
Skin Fitting 2” BSP Black
PRODUCT
INFORMATION
STANDARDS
Tru Design Skin Fittings are certified by the
International Marine Certification Institute
(
IMCI) to me ;
ISO 9093-2 Small craft -- Seacocks and
through-hull fittings -- Part 2: Non-metallic
*
Note – ½” Skin Fittings do not meet ISO 9093-2
In meeting ISO 9093-2, our skin fittings have been tested with a 155kg load
hanging off a ball valve and hose fitting as shown.
KEY FEATURES
Feature :
Manufactured from a glass reinforced
nylon composite
High strength and light weight.
Compatible with all hull types
Can be used on aluminum, steel, wood or FRP hulls.
Immune to corrosion and electrolysis
Long life with no concerns over decreased performance
due to orrosion.
Chemical resistant
Impervious to diesel, petrol and antifouling paints.
UV resistant
These fittings will not break down with ultraviolet light or
discolour from the sun.
High quality surface finish
Will not discolour with green film as similar bronze fittings
do.
Paintable
Can be painted with all types of antifouling.
Antifouling paint stays adhered to the skin fitting,
alleviating the chore of grinding and cleaning back flak
ed
paint from bronze fittings before applying antifouling.
Fits Tru-Design Ball Valves & BSPP
threads
Universal compatibility to other Tru-Design fittings, an
d
other marine components.
Large operating temperature range
Suitable for all marine environments, from -40°C to
+110°C.
Supplied in individual plastic bags with
header card and information sheet
Header card states IMCI Certification, size of hose tail
and comes with instructions in the bag as per IMCI
regulations.
Doc: PIS - Skin Fittings 3.0.doc
ERS IN MARINE COMPOSITE FITTIN
SPECIFICATIONS
HULL COMPATIBILITY
The Tru-Design Skin Fittings are suitable for
aluminium, fibreglass - cored and solid, woo
Tru-Design Skin Fittings are also able to be
taken to only locate the skin fitting in the cent
FLOW DIAMETER & HULL THICKNESS
Size
Minimum I.D.
Maxim
½”
BSP
12
mm
¾”
BSP
17
mm
1”
BSP
23
mm
1¼”
BSP
30
mm
BSP
36
mm
2”
BSP
48
mm
DIMENSIONS
All dimensions in mm.
All dimensions nominal.
½”
¾”
1”
1
SPECIFICATIONS
HULL COMPATIBILITY
The Tru-Design Skin Fittings are s
all types of hull cons
aluminium, fibreglass - cored and solid, wooden sandwich.
Tru-Design Skin Fittings are also able to be used on caulked solid wood hulls –
t ken to only lo ate the skin fitting in the centre of any individual plank.
FLOW DIAMETER & HULL THICKNESS
Size
Minimum I.D.
Maximum Hull Thickness
½”
BSP
12
mm
28
mm
¾”
BSP
17
mm
28
mm
1”
BSP
23
mm
28
mm
1¼”
BSP
30
mm
30
mm
1½”
BSP
36
mm
30
mm
2”
BSP
48
mm
40
mm
DIMENSIONS
All dimensions in mm.
All dimensions nominal.
½”
¾”
1”
1¼”
1½”
Part #
Description
TD90737
Thru Hull (Skin Fitting) 1/2" NPS White
TD90738
Thru Hull (Skin Fitting) 3/4" NPS White
TD90739
Thru Hull (Skin Fitting) 1" NPS White
TD90740
Thru Hull (Skin Fitting) 1-1/4" NPS White
TD90741
Thru Hull (Skin Fitting) 1-1/2" NPS White
Cover...,New3,New4,New5,New6,New7,New8,New9,New10,New11,New12 New14,New15,New16,New17,New18,New19,New20,New21,New22,New23,...544
Powered by FlippingBook