NEW20
Doc: PIS - Aquavalve 3.0.doc
Page 1 of 5
PRODUCT
INFORMATION
LEADERS IN MARINE COMPOSITE FITTINGS
AQUAVALVE
The Tru-Design Aquavalve is the most versatile valve on the market today. The Aquavalve is
designed and made in New Zealand, for demanding marine sanitation applications.
The Aquavalve is typically used in marine toilet applications where protection for the environment
necessitates the need to control effluent discharge – in many countries this is governed by
regulation. The effluent can be held in a holding tank for later discharge overboard or to a shore
side facility.
The Tru-Design Aquavalve is moulded from a glass reinforced nylon composite. High strength,
high-modulus glass fibres impregnated into the nylon provides dramatic strength, stiffness,
toughness, and dimensional stability.
MODELS
Part #
Description
90314
Aquavalve White
90312
Aquavalve Black
New
Products
Doc: PIS - Connector 3.0.d c
Page 1 of 3
LEADERS IN MARINE COMPOSITE FITTINGS
Tru-Design Connectors are moulded from a glass reinforced nylon composite. High strength, high-
modulus glass fibres impregnated into the nylon provides dramatic strength, stiffness, toughness,
and dimen io al stability.
Tru-Design Connectors eliminate the corrosion and electrical bonding problems associated with
metallic fittings. The Connectors are designed for twin hose clamps, and to not crush under high
load conditions.
MODELS
Part #
Description
90245
Connector 13mm/13mm
90599
Connector 13mm/13mm PKG
90248
Connector 19mm/19mm
90600
Connector 19mm/19mm PKG
90257
Connector 25mm/25mm
90601
Connector 25mm/25mm PKG
90356
Connector 32mm/32mm
90602
Connector 32mm/32mm PKG
90290
Connector 38mm/38mm
90603
Con ector 38mm/38mm PKG
90492
Connector 50mm/50mm
90604
Connector 50mm/50mm PKG
PKG product is supplied in bags with header cards
IN
CONNECTOR
Designed and made in New Zealand, Tru-Design Connectors are the superior com
conn ction for linking 2 hoses.
Tru-Design Connectors are moulded from a glass reinforced nylon composite. Hig
modulus glass fibres impregnated into the nylon provides dramatic strength, stiffne
and dimensional stability.
Tru-Design Connectors eliminate the corrosion and electrical bonding problems as
metallic fittings. The Connectors are designed for twin hose clamps, and to not cru
load conditions.
MODELS
Part #
Description
90245
Connector 13mm/13mm
90599
Connector 13mm/13mm PKG
90248
Connector 19mm/19mm
90600
Connector 19mm/19mm PKG
90257
90601
Connector 25mm/25mm PKG
90356
Connector 32mm/32mm
90602
Connector 32mm/32mm PKG
90290
Connector 38mm/38mm
90603
Connector 38mm/38mm PKG
90492
Connector 50mm/50mm
90604
Connector 50mm/50mm PKG
HOSE CONNECTORS and REDUCERS
STRAIGHT CONNECTORS
Doc: PIS - Connector 3.0.doc
Page 2 of 3
PRODUCT
INFORMATION
LEADERS IN MARINE COMPOSITE FITTINGS
KEY FEATURES
Feature :
Manufactured from a glass reinforced
nylon composite
High strength and light weight.
Compatible with all hull types
Can be used on aluminum, steel, wood or FRP hulls.
Immune to corrosion and electrolysis
Long life with no concerns over decreased performance
due to corrosion.
Chemical resistant
Impervious to diesel, petrol and antifouling paints.
UV resistant
These fittings will not break down with ultraviolet light or
discolour from the sun.
High quality surface finish
Will not discolour with green film as similar bronze fittings
do.
Large operating temperature range
Suitable for all marine environments, from -40°C to
+110°C.
SPECIFICATIONS
FLOW DIAMETER
Size
Minimum I.D.
13
mm
9
mm
19
mm
13
mm
25
mm
18
mm
32
mm
23
mm
38
mm
28
mm
50
mm
41
mm
INF
DIMENSIONS
All dimensions in mm.
All dimensions nominal.
13
mm
19
mm
25
mm
32
mm
38
mm
50
mm
½”
¾”
1”
1¼”
1½”
2”
INSTALLATION
Fit the hose using hot water to soften.
Apply twin hose clamps for a secure connection.
Part #
Description
TD90245
Straight Hose Connector 13mm (1/2") x 1/2"
TD90248
Straight Hose Connector 19mm (3/4") x 3/4"
TD90257
Straight Hose Connector 25mm (1") x 1"
TD90356
Straight Hose Connector 32mm (1-1/4") x 1-1/4"
TD90290
Straight Hose Connector 38mm (1-1/2") x 1-1/2"
