NEW10
Doc: PIS - Aquavalve 3.0.doc
Page 1 of 5
PRODUCT
INFORMATION
LEADERS IN MARINE COMPOSITE FITTINGS
AQUAVALVE
The Tru-Design Aquavalve is the most versatile valve on the market today. The Aquavalve is
designed and made in New Zealand, for demanding marine sanitation applications.
The Aquavalve is typically used in marine toilet applications where protection for the environment
necessitates the need to control effluent discharge – in many countries this is governed by
regulation. The effluent can be held in a holding tank for later discharge overboard or to a shore
side facility.
The Tru-Design Aquavalve is moulded from a glass reinforced nylon composite. High strength,
high-modulus glass fibres impregnated into the nylon provides dramatic strength, stiffness,
toughness, and dimensional stability.
MODELS
Part #
Description
90314
Aquavalve White
90312
Aquavalve Black
New
Products
Doc: PIS - Aquavalve Accessories 3.0.doc
Page 1 of 5
PRODUCT
INFORMATION
LEADERS IN MARINE COMPOSITE FITTINGS
AQUAVALVE ACCESSORIES
The Tru-Design Aquavalve is the most versatile valve on the market today. A range of fittings is
available to suit the variability of marine plumbing applications.
These fittings can be used on the Aquavalve, Aquavalve through Bulkhead, Electronic Aquavalve
or 3 Way Connector.
MODELS
TAILS
Straight Tails suited to standard sizes of tubing.
Part #
Description
90251
Tail 19mm 1½” BSP White
90538
Tail 19mm 1½” BSP White PKG
90262
Tail 25mm 1½” BSP White
90539
Tail 25mm 1½” BSP White PKG
90283
Tail 32mm 1½” BSP White
90540
Tail 32mm 1½” BSP White PKG
90294
Tail 38mm 1½” BSP White
90541
Tail 38mm 1½” BSP White PKG
90249
Tail 19mm 1½” BSP Black
90542
Tail 19mm 1½” BSP Black PKG
90260
Tail 25mm 1½” BSP Black
90543
Tail 25mm 1½” BSP Black PKG
90280
Tail 32mm 1½” BSP Black
90544
Tail 32mm 1½” BSP Black PKG
90288
Tail 38mm 1½” BSP Black
90545
Tail 38mm 1½” BSP Black PKG
*
PKG denotes product is packaged in a plastic bag with header card. Other product is packaged loose.
Doc: PIS - Aquavalve Accessories 3.0.doc
Page 1 of 5
LEADERS IN MARINE COMPOSITE FITTINGS
AQUAVALVE ACCESSORIES
The Tru-Design Aquavalve is the most versatile valve on the market today. A range of fittings is
available to suit the variability of marine plumbing applications.
These fittings can be used on the Aquavalve, Aquavalve through Bulkhead, Electronic Aquavalve
or 3 Way Connector.
MODELS
TAILS
Straight Tails suited to standard sizes of tubing.
Part #
Description
90251
Tail 19mm 1½” BSP White
90538
Tail 19mm 1½” BSP White PKG
90262
Tail 25mm 1½” BSP White
90539
Tail 25mm 1½” BSP White PKG
83
il 32 ½” BSP White
40
Tail 32mm 1½” BSP White PKG
90294
Tail 38mm 1½” BSP White
41
il 38
it
90249
il 19m
Black
542
il 19
Black PKG
260
il 25
Black
90543
Tail 25mm 1½” BSP Black PKG
80
il 32 m 1½
l
90544
Tail 32mm 1½” B l
88
il 38
l
5
il 38
l
*
PKG denotes product is packaged in a plastic bag with header card. Other product is packaged loose.
Doc: PIS - Aquavalve Acc ssories 3.0.doc
Page 1 of 5
LEADERS IN MARINE COMPOSITE FITTINGS
MODELS
TAILS
Straight Tails suited to standard sizes of tubing.
Part #
Description
90251
Tail 19mm 1½” BSP White
90538
Tail 19mm 1½” BSP White PKG
90262
Tail 25mm 1½” BSP White
90539
Tail 25mm 1½” BSP White PKG
90283
Tail 32mm 1½” BSP White
90540
Tail 32mm 1½” BSP White PKG
90294
Tail 38mm 1½” BSP White
90541
Tail 38mm 1½” BSP White PKG
90249
Tail 19mm 1½” BSP Black
90542
Tail 19mm 1½” BSP Black PKG
90260
Tail 25mm 1½” BSP Black
90543
Tail 25mm 1½” BSP Black PKG
90280
Tail 32mm 1½” BSP Black
90544
Tail 32mm 1½” BSP Black PKG
90288
Tail 38mm 1½” BSP Black
90545
Tail 38mm 1½” BSP Black PKG
*
PKG denotes product is packaged in a plastic bag with header card. Other product is packaged loose.
Doc: PIS - Aquavalve Accessories 3.0.doc
Page 1 of 5
LEADERS IN MARINE COMPOSITE FITTINGS
available to suit the variability of marine plumbing applications.
These fittings can be used on the Aquavalve, Aquavalve through Bulkhead, Electronic Aquavalve
or 3 Way Connector.
MODELS
TAILS
Straight Tails suited to standard sizes of tubing.
Part #
Description
90251
Tail 19mm 1½” BSP White
90538
Tail 19mm 1½” BSP White PKG
90262
Tail 25mm 1½” BSP White
90539
Tail 25mm 1½” BSP White PKG
90283
Tail 32mm 1½” BSP White
90540
Tail 32mm 1½” BSP White PKG
90294
Tail 38mm 1½” BSP White
90541
Tail 38mm 1½” BSP White PKG
90249
Tail 19mm 1½” BSP Black
90542
Tail 19mm 1½” BSP Black PKG
90260
Tail 25mm 1½” BSP Black
90543
Tail 25mm 1½” BSP Black PKG
90280
Tail 32mm 1½” BSP Black
90544
Tail 32mm 1½” BSP Black PKG
90288
Tail 38mm 1½” BSP Black
90545
Tail 38mm 1½” BSP Black PKG
*
PKG denotes product is packaged in a plastic bag with header card. Other product is packaged loose.
PRODUCT
INFORMATION
THREADED CONNECTOR
The threaded connector can be used to connect the Aquavalve or 3 Way Connector to rigid PVC
plumbing. The threaded connector interfaces with a PVC fitting designed for connection to steel
piping (available as part of most PVC piping ranges).
Part #
Description
90461
Connect r Threaded 1½” / 1½” BSP
90546
Connector Threaded 1½” / 1½” BSP PKG
PLUG
The plug can is used to block one port when parts of the system are not yet installed, or
maintenance is being completed and the system still needs to be used.
Part #
Description
90237
Plug 1½” BSP White
90547
Plug 1½” BSP White PKG
90
° TAILS
Angled Tails suited to the most common sizes of tubing used in marine plumbing. Tails come
packaged with a Blue Seal to allo fitting to be rotated to more suitable position if required.
Part #
Description
90259
Aquavalve 90° 25mm 1½” BSP White
90299
Aquavalve 90° 38mm 1½” BSP White
90466
Aquavalve 90° 25mm 1½” BSP Black
90293
Aquavalve 90° 38mm 1½” BSP Black
120
° TAILS
Angled Tails suited to the most common sizes of tubing used in
ls come
packaged with a Blue Seal to allow fitting to be rotated to a more suitable position if required.
Part #
Description
90258
Aquavalve 120° 25mm 1½” BSP White
90298
Aquavalve 120° 38mm 1½” BSP White
90465
Aquavalve 120° 25mm 1½” BSP Black
90297
Aquavalve 120° 38mm 1½” BSP Black
Doc: PIS - Aquavalve Accessories 3.0.doc
Page 2 of 5
PRODUCT
INFORMATION
LEADERS IN MARINE COMPOSITE FITTINGS
THREADED CONNECTOR
The threaded connector can be used to connect the Aquavalve or 3 Way Connector to rigid PV
plumbing. The threaded connector interfaces with a PVC fitting designed for connection to steel
piping (available as part of most PVC piping ranges).
Part #
Description
90461
Connector Threaded 1½” / 1½” BSP
90546
Connector Threaded 1½” / 1½” BSP PKG
PLUG
The plug c n is used to block one port when parts of the system are not yet installed, or
maintenance is being co pleted and the system still needs to be used.
Part #
Description
90237
Plug 1½” BSP White
90547
Plug 1½” BSP White PKG
90
° TAILS
An led Tails suited to the most common sizes of tubing used in marine plumbing. Tails come
packaged with a Blue Seal to allow fitting to be rotated to a more suitable position if required.
Part #
Description
90259
Aquavalve 90° 25mm 1½” BSP White
299
u alve 90° 38mm 1½” BSP White
90466
Aquavalve 90° 25mm 1½” BSP Black
93
v lv ° 38
”
Black
120
° TAILS
Angled Tails suited to the most common sizes of tubing
ng. Tails come
packaged with a Blue Seal to allow fitting to be rotated to a more suitable position if required.
art #
Description
90258
Aquavalve 120° 25mm 1½” BSP White
90298
Aquavalve 120° 38mm 1½” BSP White
90465
Aquavalve 120° 25mm 1½” BSP Black
97
v lv
° 38
”
Black
Doc: PIS - Aquavalve Accessories 3.0.doc
Page 2 of 5
PRODUCT
INFORMATION
THREADED CONNECTOR
The threaded connector can be used to connect the Aquavalve or 3 Way Connector to rigid PVC
plumbing. The threaded connector i terfaces with a PVC fitting designed for connection to steel
piping (available as part of most PVC piping ranges).
Part #
Description
90461
Connector Threaded 1½” / 1½” BSP
90546
Connector Threaded 1½” / 1½” BSP PKG
PLUG
The plug can is used to block one port when parts of the system are not yet installed, or
maintenance is being completed and the system still needs to be used.
Part #
Description
90237
Plug 1½” BSP White
90547
Plug 1½” BSP White PKG
90
° TAILS
Angled Tails suited to the most common sizes of tubing used in marine plumbing. Tails come
packaged with a Blue Seal to allow fitting to be rotated to a more suitable position if required.
Part #
Description
90259
Aquavalve 90° 25mm 1½” BSP White
90299
Aquavalve 90° 38mm 1½” BSP White
90466
Aquavalve 90° 25mm 1½” BSP Black
90293
Aquavalve 90° 38mm 1½” BSP Black
120
° TAILS
Angled Tails suited to the most common sizes of tubing use in m rin plumbing. Tails come
packaged with Blue Seal to allow fitting to be rotated to a more suitable position if required.
Part #
Description
90258
Aquavalve 120° 25mm 1½” BSP White
90298
Aquavalve 120° 38 1 ” BSP White
90465
Aquavalve 120° 25mm 1½” BSP Black
90297
Aquavalve 120° 38mm 1½” BSP Black
Doc: PIS - Aquavalve Accessories 3.0.doc
Page 2 of 5
PRODUCT
INFORMATION
LEADERS IN MARINE COMPOSITE FITTINGS
THREADED CONNECTOR
The threaded onn ctor can be used to connect the Aquavalve or 3 Way Connect r to rigid PV
plumbing. The thr aded connector interfaces with a PVC fitting designed for connection to steel
piping (available as part of most PVC piping ranges).
Part #
Description
90461
Connector Threaded 1½” / 1½” BSP
9054
Connector Threaded 1½” / 1½” BSP PKG
PLUG
The plug can is used to block one port when parts of the system are not yet installed, or
maintenance is being completed and the system still needs to be used.
Part #
Description
90237
Plug 1½” BSP White
90547
Plug 1½” BSP White PKG
90
° TAILS
Angled Tails suited to the most common sizes of tubing used in marine plumbing. Tails come
packaged with a Blue Seal to allow fitting to be rotated to a more suitable position if required.
Part #
Description
90259
Aquavalve 90° 25mm 1½” BSP White
90299
Aquavalve 90° 38mm 1½” BSP White
90466
Aquavalve 90° 25mm 1½” BSP Black
90293
Aquavalve 90° 38mm 1½” BSP Black
120
° TAILS
Angled Tails suited to the most common sizes of tubing used in marine plumbing. Tails come
pack ged with a Blue Seal to allow fitting to be rotated to a more suitable position if required.
Part #
Description
90258
Aquavalve 120° 25mm 1½” BSP White
90298
Aquavalve 120° 38mm 1½” BSP White
90465
Aquavalve 120° 25mm 1½” BSP Black
90297
Aquavalve 120° 38mm 1½” BSP Black
Part #
Description
TD90251
Tail 19mm (3/4") x 1-1/2" BSP White
D90249
Tail 19mm (3/4") x 1-1/2" BSP Black
TD90260
Tail 25 m (1") x 1-1/2" BSP Black
TD9028
Tail 32 m (1-1/4") x 1-1/2" BSP Black
TD90288
Tail 38mm (1-1/2") x 1-1/2" BSP Black
Part #
Description
TD90466
Aquavalve 90° Tail 25mm (1") x 1-1/2" BSP Black
TD90293
Aquavalve 90° Tail 38mm (1-1/2") x 1-1/2" BSP Black
Part #
Description
TD90466
Aquavalve 120° Tail 25mm (1") x 1-1/2" BSP Black
TD90293
Aquavalve 120° Tail 38mm (1-1/2") x 1-1/2" BSP Black
