NEW21
Doc: PIS - Aquavalve 3.0.doc
Page 1 of 5
PRODUCT
INFORMATION
LEADERS IN MARINE COMPOSITE FITTINGS
AQUAVALVE
The Tru-Design Aquavalve is the most versatile valve on the market today. The Aquavalve is
designed and made in New Zealand, for demanding marine sanitation applications.
The Aquavalve is typically used in marine toilet applications where protection for the environment
necessitates the need to control effluent discharge – in many countries this is governed by
regulation. The effluent can be held in a holding tank for later discharge overboard or to a shore
side facility.
The Tru-Design Aquavalve is moulded from a glass reinforced nylon composite. High strength,
high-modulus glass fibres impregnated into the nylon provides dramatic strength, stiffness,
toughness, and dimensional stability.
MODELS
Part #
Description
90314
Aquavalve White
90312
Aquavalve Black
New
Products
Doc: PIS - Connector 90 3.1.doc
I
LEADERS IN MARINE COMPOSITE FITTINGS
90
° CONNECTOR
Designed and made in New Zealand, Tru-Design Connectors are the superior co
connection for linking 2 hoses. The 90° Connector is especially useful for elimin
bends involved in plumbing with stiff hose. This allows hose to be securely route
bulkheads and walls.
Tru-Design Connectors are moulded from a glass reinforced nylon composite. Hi
modulus glass fibres impregnated into the nylon provides dramatic strength, stiff
and dimensional stability.
Tru-Design Connectors eliminate the corrosion and electrical bonding problems a
metallic fittings. The Connectors are designed for twin hose clamps, and to not cr
load conditions.
MODELS
Part #
Description
90701
Connector 90° 19mm White
90702
Connector 90° 19mm White PKG
90493
Connector 90° 25mm White
90605
Connector 90° 25mm White PKG
90292
Con ect r 90° 38 m White
90606
Connector 90° 38mm White PKG
90495
Connector 90° 50mm White
90607
Connector 90° 50mm White PKG
90699
Connector 90° 19mm Black
90700
Connector 90° 19mm Black PKG
90494
Connector 90° 25mm Black
90608
Connector 90° 25mm Black PKG
Connector 90° 38mm Black
90609
Connector 90° 38mm Black PKG
90496
Connector 90° 50mm Black
90610
Connector 90° 50mm Black PKG
PKG product is supplied in bags with header cards
90
º CONNECTORS
Y PIECES
Doc: PIS - Reducer 3.0.doc
LEADERS IN MARINE COMPOSITE FITTINGS
REDUCER
Designed and made in New Zealand, Tru-Design Reducers are
for linking 2 hoses of different sizes.
Tru-Design R ducers are moulded from a glass reinforced nylo
modulus glass fibres impregnated into the nylon provides dram
and dimensional stability.
Tru-Design Reducers eliminate the corrosion and electrical bon
metallic fittings. The Reducers are designed for twin hose clam
load conditions.
MODELS
Part #
Description
90403
Reducer 19mm – 13mm
90611
Reducer 19mm – 13mm PKG
90404
Reducer 19mm – 16mm
90612
Reducer 19mm – 16mm PKG
90405
Reducer 25mm – 19mm
90613
Reducer 25mm – 19mm PKG
90406
Reducer 32mm – 25mm
90614
Reducer 32mm – 25mm PKG
90407
Reducer 38mm – 25mm
90615
Reducer 38mm – 25mm PKG
90408
Reducer 38mm – 32mm
90616
Reducer 38mm – 32mm PKG
PKG product is supplied in bags with header cards
REDUCERS
PRODUCT
INFORMATION
DIMENSIONS
All dimensions in mm.
All dimensions nominal.
19-13
19-16
25-19
32-25
38-25
38-32
INSTALLATION
Fit the hose using hot water to soften.
Apply twin hose clamps for a secure connection.
It is recommended that all plumbing is securely fastened to the boat structure to eliminate rattling,
wear or inadvertent disconnection.
SERVICING
As composite Reducers are immune to corrosion, minimal servicing is required.
Hose clamps should be checked regularly for a secure connection.
Tru-Design Plastics Ltd. accepts no responsibility for Products which are improperly installed or tampered with. Although the information presented in this product information sheet is believed to be
Doc: PIS - Connector 90 3.1.doc
Page 3 of 3
PRODUCT
INFORMATION
LEADERS IN MARINE COMPOSITE FITTINGS
DIME SIONS
All dimensions in mm.
All dimensions nominal.
19
mm
25
mm
38
mm
50
mm
¾”
1”
1½”
2”
INSTALLATION
Fit the hose using hot water to soften.
Apply twin hose clamps for a secure connection.
It is recommended that all plumbing is securely fastened to the boat structure to eliminate rattling,
wear or inadvertent disconnection.
SERVICING
As composite Connectors are immune to corrosion, minimal servicing is required.
Hose clamps should be checked regularly for a secure connection.
Tru-Design Plastics Ltd. accepts no responsibility for Products which are improperly installed or tampered with. Although the information presented in this product information sheet is believed to be
accurate and reliable, no responsibility for inaccuracies can be assumed by Tru-Design Plastics Ltd. This performance data is typical only and variations due to componentmanufacturing tolerances
are normal. Tru-Design Plastics Ltd. reserves the right at any time tochange performancecharacteristics or specificationswithoutpriornotice.
Tru-Design Plastics Ltd, all rights reserved.
Part #
Description
D90403
Reducer 19mm to 13mm (3/4" to 1/2")
TD90404
Reducer 19mm to 16mm (3/4" to 5/8")
TD90405
Reducer 25mm to 19mm (1" to 3/4")
TD90406
Reducer 32m to 25mm (1-1/4" to 1")
TD90407
Reducer 38mm to 25mm (1-1/2" to 1")
TD90408
Reducer 38mm to 32mm (1-1/2" to 1-1/4")
Part #
Description
TD90494
90
º Hose Connector 25mm (1") x 1"
D90291
90
º Hose Connector 38mm (1-1/2") x 1-1/2"
Part #
Description
TD90456
Y Piece 25mm (1")
TD90457
Y Piece 25/38mm (1"/1-1/2")
TD90458
Y Piece 38mm (1-1/2")
1/2" - 3/4" 3/4" - 5/8" 1" - 3/4"
1-1/4" - 1"
1-1/2" - 1" 1-1/2" - 1-1/4"
A Y Piece is the best way for combining waste streams. Unlike a 'T' there is
less likelihood of blockage, salt buildup does not degrade performance and
the flow does not back up into the non-flowing branch.
Y Pieces are available in a variety of sizes to allow 25mm and 38mm drain
hoses to branch into one line. Manufactured in Glass Reinforced Nylon 6
Polymer, they are extremely tough and will handle both hot and cold water.