NEW7
Doc: PIS - Aquavalve 3.0.doc
Page 1 of 5
PRODUCT
INFORMATION
LEADERS IN MARINE COMPOSITE FITTINGS
AQUAVALVE
The Tru-Design Aquavalve is the most versatile valve on the market today. The Aquavalve is
designed and made in New Zealand, for demanding marine sanitation applications.
The Aquavalve is typically used in marine toilet applications where protection for the environment
necessitates the need to control effluent discharge – in many countries this is governed by
regulation. The effluent can be held in a holding tank for later discharge overboard or to a shore
side facility.
The Tru-Design Aquavalve is moulded from a glass reinforced nylon composite. High strength,
high-modulus glass fibres impregnated into the nylon provides dramatic strength, stiffness,
toughness, and dimensional stability.
MODELS
Part #
Description
90314
Aquavalve White
90312
Aquavalve Black
New
Products
T
n
T
P
Doc: PIS - Aquavalve 3.0.doc
Page 1 of 5
PRODUCT
INFORMATION
LEADERS IN MARINE COMPOSITE FITTINGS
AQUAVALVE
The Tru-Design Aquavalve is the most versatile valve on the market today. The Aquavalve is
designed and made in New Zealand, for demanding marine sanitation applications.
The Aquavalve is typically used in marine toilet applications where protection for the environment
necessitates the need to control effluent discharge – in many countries this is governed by
regulation. Th effluent can b held in a holding tank for later discha ge overboard or to a shor
side facility.
The Tru-Design Aquavalve is moulded from a glass reinforced nylon composite. High strength,
high-modulus glass fibres impregnated into the nylon provides dramatic strength, stiffness,
toughness, and dimensional stability.
MODELS
Part #
Description
90314
Aquavalve White
90312
Aquavalve Black
Doc: PIS - Aquavalve 3.0.doc
Page 1 of 5
PRODUCT
I FO TI N
LEADERS IN MARINE COMPOSITE FITTINGS
L
The Tru-Design Aquavalve is the most versatile valve on the market today. The Aquavalve is
designed and ade in New Zealand, for de anding arine sanitation applications.
The Aquavalve is typically used in arine toilet applications where protection for the environment
necessitates the need to control effluent discharge – in many countries this is governed by
regulation. The effluent can be held in a holding tank for later discharge overboard or to a shore
side facility.
The Tru-Design Aquavalve is oulded fro a lass reinforce nylon composite. High strength,
high- odulus glass fibres impregnated into the nylon provides dra atic strength, stiffness,
toughness, and di ensional stability.
O LS
Part #
Description
90314
Aquavalve White
90312
Aquavalve Black
oc: PIS - Aquavalve 3.0.doc
Page 1 of 5
PRODUCT
INFORMATION
LEADERS IN MARINE COMPOSITE FITTINGS
QUAVALVE
he Tru-Design Aquavalve is the most ersatile valve on the market today. The Aquavalve is
esigned and ma in New Zealand, for d manding marine sanitation applicatio s.
he Aquavalve is typically used in marine toilet applic tions where protection for th environment
ecessitates the ed to control fflu nt discharg – in many countries this is governed by
gulation. The effluent ca be held in a holding tank for later discharge overboard or to a shore
ide facility.
he Tru-Design Aquavalve is moulded from a glass reinforced nylo composite. High strength,
igh-modulus glass fibres impregnated into the nylon provides dramatic strength, stiffness,
ughness, and dimensional stability.
ODELS
Part #
Description
90314
Aquavalve White
90312
Aquavalve Black
Doc: PIS - Aquavalve 3.0.doc
LEADERS IN MARINE COMPOSITE FITTINGS
necessitates the need to control effluent discharge – in many countries this is gov
regulation. The effluent can be held in a holding tank for later discharge overboard
side facility.
The Tru-Design Aquavalve is moulded from a glass reinforced nylon composite. Hi
high-modulus glass fibres impregnated into the nylon provides dramatic strength,
toughness, and dimensional stability.
MODELS
Part #
Description
90314
Aquavalve White
90312
Aquavalve Black
Doc: PIS - Aquavalve 3.0.doc
Page 2 of 5
PRODUCT
INFORMATION
INTERNATIONAL STANDARDS
Sewage entering our waterways and oceans has become a problem faced in many areas.
Legislation forbidding the dumping of marine waste has been in place in areas such as the Great
Lakes (USA) for many years. With 124 countries now party to MARPOL 73/78 Annex IV for ships,
smaller vessels are now being targeted. Legislation in many countries now dictates the use of
holding tanks near shore, or in defined areas.
By installing a diverting valve, the user has the ability to hold sewage when required by law, and
can pump directly overboard when allowed.
The Aquavalve has the ability to be locked to comply with local legislation.
KEY FEATURES
Feature :
Manufactured from a glass reinforced
nylon composite
High strength and light weight.
Stainless steel fasteners
Will not corrode in salt laden air.
Easy installation
With a range of straight, 90° and 120° tails, and two seal
options, plumbing in confined spaces is made easy.
Clear and easy to understand labeling
of positions
OPEN (in green) when the handle is turned. The operator
knows exactly what direction the flow is going in.
Valve handles have a red “closed” arrow. The operator
knows exactly what direction the flow is not going in.
Handle position lockable
Legislation in some regions require the overboard
discharge handle to be locked into the holding tank
position when in ‘no discharge’ zones
Available in black or white
Fits in with colour schemes in plumbing areas allowing
easy identification of components.
Pressure tested
All valves are pressure tested to ensure quality and safety
in respect to sealing and operation.
Silicon seal
The Aquavalve® is the only valve on the market today
with smooth movement and an excellent seal with good
wear resistance.
Composite spanner included
Avoids using pipe wrenches that gouge the fitting.
Facilitates access in tight places.
Fascia plate on standard mo el can be
removed to reveal simple “open - open
-
inlet” labeling.
Where product is not used for marine toilets, all toilet
references are removed.
Large operating temperature range
Suitable for all marine environments, from -40°C to
+110°C
Doc: PIS - Aquavalve 3.0.doc
LEADERS IN MARINE COMPOSITE FITTINGS
SPECIFICATIONS
The Aquavalv is designed to withstand the rigors of
T e Aquavalve is resistant to most chemicals used in
manufacturers should be followed with regards to ch
As per marine toilet use best practice, all wastes sho
reduce the chance of buildup and permeation issues.
The Aquavalve is a diverting valve. The rotor seal is
therefore may not be suitable for vacuum toilets dep
the toilet.
DIMENSIONS
All dimensions in mm.
All dimensions nominal.
Doc: PIS - Aquavalve 3.0.doc
LEADERS IN MARINE COMPOSI E FITTINGS
SPECIFICATIONS
The Aquavalve is designed o withstand the rigo
The Aquavalv is resistant to most chemicals us
m n facturers should be follo ed with egards t
As per marine toilet use best practice, all wastes
r duce t e hance of buildup and permeation i
The Aquavalve is a diverting valve. The rotor se
therefore may not be suitable for vacuum toil ts
th toilet.
DIMENSIONS
All dimensions in mm.
All dimensions nominal.
TD90314
TD90312
TD90314
Aquavalve White
TD90312
Aquavalve Black
