NEW18
Doc: PIS - Aquavalve 3.0.doc
Page 1 of 5
PRODUCT
INFORMATION
LEADERS IN MARINE COMPOSITE FITTINGS
AQUAVALVE
The Tru-Design Aquavalve is the most versatile valve on the market today. The Aquavalve is
designed and made in New Zealand, for demanding marine sanitation applications.
The Aquavalve is typically used in marine toilet applications where protection for the environment
necessitates the need to control effluent discharge – in many countries this is governed by
regulation. The effluent can be held in a holding tank for later discharge overboard or to a shore
side facility.
The Tru-Design Aquavalve is moulded from a glass reinforced nylon composite. High strength,
high-modulus glass fibres impregnated into the nylon provides dramatic strength, stiffness,
toughness, and dimensional stability.
MODELS
Part #
Description
90314
Aquavalve White
90312
Aquavalve Black
New
Products
PROD
INFORMATI
LONG THREAD TAIL - 90°
Designed and made in New Zealand, Tru-Design Long Thread Tails are the superior composit
connection for fitting hose to threaded fittings.
Tru-Design Tails are
rced nylon composite. High strength, high-
modulus glass fibres impregnated into the nylon provides dramatic strength, stiffness, toughne
and dimensional stability.
Tru-Design Tails eliminate the corrosion and electrical bonding problems associated with meta
fittings. The Tails are designed for twin hose clamps, and to not crush under high load conditio
MODELS
Part #
Description
90517
Tail 13mm ½” BSP Long Thread 90°
90565
Tail 13mm ½” BSP Long Thread 90° PKG
90372
Tail
90566
Tail 19mm ¾” BSP Long Thread 90° PKG
90373
Tail 25mm 1” BSP Long Thread 90°
90567
Tail 25mm 1” BSP Long Thread 90° PKG
90374
Tail 32mm 1¼” BSP Long Thread 90°
90568
Tail 32mm 1¼” BSP Long Thread 90° PKG
90375
Tail 38mm 1½” BSP Long Thread 90°
90569
Tail 38mm 1½” BSP Long Thread 90° PKG
PRODUCT
INFORMATION
LONG THREAD TAIL - 90°
Designed and made in New Zealand, Tru-Design Long Thread Tails are the superior composite
connection for fitting hose to threaded fittings.
Tru-Design Tails are moulded from a glass reinforced nylon composite. High strength, high-
modulus glass fibres impregnated into the nylon provides dramatic strength, stiffness, toughness,
Doc: PIS - Tail Long Thread 3.0.doc
Page 1 of 4
PRODUCT
INFORMATION
LEADERS IN MARINE COMPOSITE FITTINGS
LONG THREAD TAIL
Designed and made in New Zealand, Tru-Design Long Thread Tails are the superior composite
connection for fitting hose to threaded fittings.
Tru-Design Tails are moulded from a glass reinforced nylon composite. High strength, high-
modulus glass fibres impregnated into the nylon provides dramatic strength, stiffness, toughness,
and dimensional stability.
Tru-Design Tails eliminate the corrosion and electrical bonding problems associated with metallic
fittings. The Tails are designed for twin hose clamps, and to not crush under high load conditions.
MODELS
Part #
Description
90246
Tail 13mm ½” BSP Long Thread
90557
Tail 13mm ½” BSP Long Thread PKG
90252
Tail 19mm ¾” BSP Long Thread
90558
Tail 19mm ¾” BSP Long Thread PKG
90263
Tail 25mm 1” BSP Long Thread
90559
Tail 25mm 1” BSP Long Thread PKG
90285
Tail 32mm 1¼” BSP Long Thread
90560
Tail 32mm 1¼” BSP Long Thread PKG
90231
Tail 38mm 1½” BSP Long Thread
90561
Tail 38mm 1½” BSP Long Thread PKG
90518
Tail 50mm 2” BSP Long Thread
90562
Tail 50mm 2” BSP Long Thread PKG
PKG product is supplied in bags with header cards
Doc: PIS - Tail Long Thread 3.0.doc
Page 1 of 4
LEADERS IN MARINE COMPOSITE FITTINGS
Tru-Design Tails are moulded from a glass reinforced nylon composite. High strength, high-
modulus glass fibres impregnated into the nylon provides dramatic strength, stiffness, toughness,
and dimensional stability.
Tru-Design Tails eliminate the corrosion and electrical bonding problems associated with metallic
fittings. The Tails are designed for twin hose clamps, and to not crush under high load conditions.
MODELS
Part #
Description
90246
Tail 13mm ½” BSP Long Thread
90557
Tail 13mm ½” BSP Long Thread PKG
90252
Tail 19mm ¾” BSP Long Thread
90558
Tail 19mm ¾” BSP Long Thread PKG
90263
Tail 25mm 1” BSP Long Thread
90559
Tail 25mm 1” BSP Long Thread PKG
90285
Tail 32mm 1¼” BSP Long Thread
90560
Tail 32mm 1¼” BSP Long Thread PKG
90231
Tail 38mm 1½” BSP Long Thread
90561
Tail 38mm 1½” BSP Long Thread PKG
90518
Tail 50mm 2” BSP Long Thread
90562
Tail 50mm 2” BSP Long Thread PKG
PKG product is supplied in bags with header cards
Part #
Description
TD90726
Long Thread Hose Barb 13mm (1/2") x 1/2" NPS
TD90727
Lo g Thread Hose Barb 19mm (3/4") x 3/4" NPS
TD90728
Long Thread Hose Barb 25mm (1") x 1" NPS
TD90729
Long Thread Hose Barb 32mm (1-1/4") x 1-1/4" NPS
TD90230
Long Thread Hose Barb 38mm (1-1/2") x 1-1/2" NPS
Part #
Description
TD90517
Long Thread 90º Hose Barb 13mm (1/2") x 1/2" NPS
TD90372
Long Thread 90º Hose Barb 19mm (3/4") x 3/4" NPS
TD90373
Long Thread 90º Hose Barb 25mm (1") x 1" NPS
TD90374
Long Thread 90º Hose Barb 32mm (1-1/4") x 1-1/4" NPS
TD90375
Long Thread 90º Hose Barb 38mm (1-1/2") x 1-1/2" NPS
Part #
Description
TD90517
Long Thread 120º Hose Barb 25mm (1") x 1" NPS
TD90372
Long Thread 120º Hose Barb 38mm (1-1/2") x 1-1/2" NPS
Doc: PIS - Tail Long Thread 3.0.doc
INFO
LONG THREAD TAIL
Designed a d made in New Zealand, Tru-Desi n Long Thread Tails are the superior c
connection for fitting hos to t readed fittings.
Tru-Design Tails are moulded from a glass reinforced nylon composite. High strength,
modulus glass fibres impregnated into the nylon provides dramatic strength, stiffness, t
and dimensional stability.
Tru-Design Tails eli
electrical bonding problems associated wi
fittings. The Tails are designed for twin hose clamps, and to not crush under high load
MODELS
Part #
Description
90246
Tail 13mm ½” BSP Long Thread
90557
Tail 13mm ½” BSP Long Thread PKG
90252
Tail 19mm ¾” BSP Long Thread
90558
Tail 19mm ¾” BSP Long Thread PKG
90263
Tail 25mm 1” BSP Long Thread
90559
Tail 25mm 1” BSP Long Thread PKG
90285
Tail 32mm 1¼” BSP Long Thread
90560
Tail 32mm 1¼” BSP Long Thread PKG
90231
Ta
90561
Tail 38mm 1½” BSP Long Thread PKG
90518
Tail 50mm 2” BSP Long Thread
90562
Tail
PKG product is supplied in bags with header cards
Brand New
Product
-
Call for
Part #
Brand New
-
Call for #
LONG THREAD TAIL - 120°
Designed and made in New Zealand, Tru-Design Long Thread Tails are t
co n ction f fitting hos to threaded fittings.
Tru-Design Tails are moulded from a glass reinforced nylon composite. H
modulus glass fibres impregnated into the nylon provides dramatic streng
Doc: PIS - Tail Long Thread 120 3.0.doc
Page 2 of 4
LEADERS IN MARINE COMPOSITE FITTINGS
Feature :
Manufactured from a glass reinforced
nylon composite
High strength and light weight.
Compatible with all hull types
Can be used on aluminum, steel, wood or FRP hulls.
Immune to corrosion and electrolysis
Long life with no concerns over decreased performance
due to corrosion.
Chemical resistant
Impervious to diesel, petrol and antifouling paints.
UV resistant
These fittings will not break down with ultraviolet light or
discolour from the sun.
High quality surface finish
Will not discolour with green film as similar bronze fittings
do.
Fits Tru-Design Ball Valves & BSPP
threads
Universal compatibility to other Tru-Design fittings, and
other marine components.
Large operating temp rature range
Suitabl for all mari e environm nts, from -40°C to
+110°C.
SPECIFICATIONS
The connecting threads on the Tails are
NPS
(
National
Pipe
Straight
)
and are parallel. These
parallel threads are designed so that thread tape is wound onto the tail then screwed into place.
The advantage of parallel threads rather than tapered is that there is maximum engagement
between the mating threads providing a strong and watertight seal.
Mixing parallel and tapered threads can cause strength and sealing problems as the engagement
can frequently be only a few turns.
FLOW DIAMETER & THREAD ENGTH
il Size
Thread Size
Minimum I.D.
Thread Length
25
mm
1”
19
mm
30
mm
38
mm
1½”
30
mm
30
mm
50
mm
2”
42
mm
30
mm
PRODUCT
INFORMATION
LONG THREAD TAIL - 120°
Designed and made in New Zealand, Tru-Design Long Thread T ils are the superior composite
connection for fitting hose to threaded fittings.
